🍽️ Prodis T1515PBT‑HR Hood Dishwasher – Heavy Duty with Heat Recovery

🌡️ Heat Recovery Technology

• Increases incoming water temperature by up to 25°C
• Reduces energy consumption by up to 2190 kWh per year*
• Condenses steam back to water, returning it to the wash tank
• Virtually eliminates steam release, creating a more pleasant working environment
• Removes the need for an external condensate hood above the machine

⚡ Rapid & Versatile Wash Cycles Offers 60, 120, 180 seconds and continuous wash cycles, making it ideal for large cover restaurants, schools, and hospitals.

🖥️ Soft Touch Controls Electronic soft‑touch panel for simple operation and cycle selection.

🧼 Reliable Cleaning Performance Equipped with a powerful 1500W wash pump, extra‑large 20‑litre wash tank, and both primary and secondary filtration systems for consistent results.

💧 Automatic Drain Pump with Boost Fitted with an automatic drain pump, plus an integrated rinse boost pump and Type ‘AA’ air gap for compliance and enhanced rinsing.

🔌 Heavy‑Duty Power Runs on 9.5kW three phase power supply (optional 6kW single phase available).

📐 Practical Design 600 × 500mm basket capacity, 465mm maximum load height for large plates and gastronorm containers, deep‑drawn one‑piece wash tank with rounded corners for easy cleaning.

📦 Supplied Accessories Includes 1 dish basket, 1 flat basket, and 1 cutlery basket.

🔒 Warranty & Care Comes with a 2‑year parts‑only warranty. Recommended use with a water softener to prolong machine life and maintain dish clarity.

📊 Key Details

• Basket Size: 600 × 500mm
• Cycle Options: 60, 120, 180 seconds & continuous
• Drain Type: Automatic drain pump with rinse boost pump
• Load Height: 465mm max
• Connection: 9.5kW three phase (6kW single phase optional)
• Warranty: 2 years parts only
• Supplied Accessories: 3 baskets (dish, flat, cutlery)
• Compatibility: Gastronorm containers
• Compliance: Type ‘AA’ air gap
• Energy Saving: Heat recovery reduces consumption by up to 2190 kWh/year

⚠️ Compliance Note To fully comply with water board regulations, this machine must be connected via a type ‘AB’ air gap if connected to mains water. Installers are responsible for ensuring all regulations are adhered to.